This product gives you all you need to get your Laser toe strap adjustable on the CL828-68AN cleat. Click here to read Steve's blog on how it works and photos of the knots you need to make the control line.
The CL 828-68AN comes complete with a 2m length of 4mm EasySplice - this low friction line is ideal in this application. The colour of 4mm Rooster EasySplice supplied may vary.
Check out the video below.
Tried them all and this one works the best by far
Great little system for adjusting the toe strap tension in a laser. I have user quite a few systems but this has been the best.
However, its not the easiest to rig/ assemble and requires a bit of time and patience to get it working smoothly (4out of 5).
Once you’ve figured out how to rope it it’s so simple to use no slipping easy to cleat and uncleat.
It could only be improved with one of your videos on how to tie it or include instructions in the pack .
Finally a setup that works! I experimented for years with different lines and setups, never worked. I couldn't release or couldn't tighten. This setup is just right, the line is slippery enough and the clam cleat holds it under tension.
The video is really way too short to figure out how to install the clam cleat, I used the pictures from this site to get it right: