Laser/ILCA Kicker Primary Line for Harken Swivel Cleat

A replacement pre-made primary line for the Laser 15:1 kicker system using 100% Dyneema® SK78 12-strand of 2/3mm nominal size rope in red. Approx. 113cm overhaul length.

To use this pre-made product, you will need to 'cow splice' one loop onto the key block's becket, thread through the Harken system and then 'cow splice' onto the double block and becket. (You WILL have to remove the control line to achieve this). Also note: Our primary line is made so that even if your control line breaks, the double block and becket will kiss the key block at max off vang tension. This is partly a safety feature, but it also enables you to have the maximum range of movement.

Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser Performance (Europe) Limited. Rooster Sailing Limited is fully independent of both Laser Performance (Europe) Limited and Velum Limited.

Learn more about caring for your gear on our product care page here