Boat Maintenance Tips
Categories
Popular tags
Simple Foil Repair using the WEST SYSTEM® Epoxy System
A simple guide to fixing typical damage on leading and trailing edges on dinghy foils. - Write up by Abi BentleyHaving never fixed a chipped rudder dinghy blade tip, Roosters Mark Harper (who has built many high-performance dinghy foils in the past) showed me a very simple method of using the handy size WEST SYSTEM Six10 Epoxy to repair such damage. Below is the damage to an RS200 rudder blade causing a rather nasty chip on the rudder tip. This sort of damage is very typical of a dinghy foil. I am informed by Mark, to affect a good repair,...
Hints & Tips Index
Laser/ILCA Spars Rivets List
The ultimate riveting guide for your Laser® /ILCA spars! Upper Mast Section Upper Mast Base Plug 2 x 4.8mm (3/16") x...
SPC - Splice-able Polyester Control from Rooster
It's not often that we change rope at Rooster. We have done this to help you to avoid changing them...
Chandlery
The Laser Boom - Bolt it up! (From the Rooster Archives)
If you have just acquired an old Laser/ILCA dinghy, this was the method of attaching the aft mainsheet block to...
Hints and Tips
It's Riveting Stuff
Here you will find some top tips on how to drill off a blind rivet and more information on rivets...