Official Kicker Tang suitable for the following rigs.

• Laser® Standard
• Laser® Radial
• Laser® 4.7

Please note: If used with the Laser bottom spar section, the hole size of the kicker take off hole for this RWO fitting is ~5.4mm diameter. The Laser class rules allow drilling out the hole in the tang is needed. "The mast tang hole may be drilled to take a larger pin.” The HARKEN 31026A is a 6.35mm (1/4") pin. See HERE for the pin details.

Official parts for the Laser® are ´as supplied´ by the Laser Centre and are fully class compliant. They have to be used if you are sailing at an association event.

Laser® is a registered trademark owned by Velum Limited and currently licensed for use in Europe to Laser Performance (Europe) Limited. Rooster Sailing Limited is fully independent of both Laser Performance (Europe) Limited and Velum Limited.